Blog

Finishing a Basement in the Treasure Valley: Egress Windows, Permits and What It Costs

Finishing a basement in the Treasure Valley takes a building permit in cities like Boise and Nampa, and any basement bedroom needs an emergency escape window, usually with a net opening of at least 5.7 square feet (5 square feet for openings at or below grade) and a sill no more than 44 inches off the floor. For cost, the 2025 Cost vs Value Report puts a model basement remodel in Boise at $49,730, and the report estimates it recoups about its full cost at resale in Boise.

Quick answer

  • Permit: yes. Boise and Nampa both require a building permit to finish a basement into living space.
  • Bedrooms: each one needs an emergency escape and rescue opening (egress window or door).
  • Egress window minimums: 5.7 sq ft net opening (5 sq ft at or below grade), 24 in tall, 20 in wide, sill no higher than 44 in.
  • Window wells: at least 9 sq ft and 36 in out from the wall. A ladder is needed if the well is deeper than 44 in.
  • Alarms: smoke and carbon monoxide alarms show up on the plans.
  • Cost: $49,730 for the 2025 report’s Boise basement model, with an estimated 100.7% recouped at resale.

Do you need a permit to finish a basement in Boise, Meridian or Nampa?

Yes, in every city we checked.

  • Boise: The city’s homeowner guide says finishing a basement to create living space requires a building permit. New wiring, plumbing and ductwork each need their own trade permits.
  • Nampa: The city’s Residential FAQ lists "finishing an attic, garage or basement to create living space" as permit work.
  • Meridian: Interior alterations to an existing home fall under the city’s Residential Remodel permit type, according to its residential permit type guide (see City of Meridian Building Services).

Eagle, Garden City, Star and Kuna each run their own building departments too. Our areas we serve pages cover who to call in each city.

What does a basement permit application include?

The details vary by city, but the plans usually show the same things. Nampa’s residential remodel checklist is a good example. It asks for:

  • Existing and new floor plans with dimensions
  • Room uses and ceiling heights
  • A window and door schedule
  • Locations of smoke and carbon monoxide alarms
  • Locations of plumbing fixtures and mechanical equipment
  • A square footage summary that includes the basement
  • Energy code compliance

It also notes that electrical, mechanical and plumbing work each need a separate permit application. Boise’s submittal checklist similarly asks for smoke and carbon monoxide detectors shown at all required locations, noted as hardwired and interconnected or battery powered where allowed.

When does a basement need an egress window?

The International Residential Code, section R310, covers emergency escape and rescue openings. As a Boulder County summary of the 2021 IRC puts it, "Basements and every sleeping room shall have at least one operable emergency escape and rescue opening."

For finishing an existing basement, the code has a specific rule, R310.6. An emergency escape opening isn’t required just because an existing basement is being altered or repaired, but new sleeping rooms created in an existing basement do need one (text as adopted in Indiana’s residential code). In practice, if your plan includes a bedroom, plan on an egress window for it. Your local building department makes the final call on how the rule applies to your house.

How big does a basement egress window have to be?

These are the IRC minimums as laid out in the egress window code handout posted by the City of Boise:

  • Net clear opening: at least 5.7 square feet. Openings at grade or below grade can be 5 square feet.
  • Net clear height: at least 24 inches.
  • Net clear width: at least 20 inches.
  • Sill height: no more than 44 inches above the floor.

"Net clear" means the actual open space when the window is fully open, not the size of the frame. A 24 by 20 inch opening only works out to 3.3 square feet, so a window that just meets both minimums still falls short. You need a bigger opening in at least one direction to reach 5 or 5.7 square feet.

What are the rules for egress window wells?

When the window sits below grade, the well outside matters as much as the window. From the same handout:

  • The well has to be at least 9 square feet in horizontal area.
  • It has to project at least 36 inches out from the wall and be at least 36 inches wide.
  • If the well is deeper than 44 inches, it needs a permanently attached ladder or steps. Ladder rungs have to be at least 12 inches wide, stick out at least 3 inches from the wall, and be no more than 18 inches apart.

Cutting a new egress opening into a foundation wall is real structural work. It means cutting concrete, adding a header where needed, digging the well, and handling drainage so the well doesn’t fill with water. It’s one of the bigger single line items in many basement finishes.

How much does it cost to finish a basement in Boise?

The most recent local figure we could find is from the 2025 Cost vs Value Report, which lists a basement remodel in Boise at $49,730. For comparison, the Mountain region average was $49,756 and the national average $52,012.

The report’s model basement project finishes a lower level into a 20 by 30 foot entertaining area with a wet bar and a 5 by 8 foot full bathroom. It includes about 10 feet of cabinetry at the bar with a sink and small refrigerator, recessed and surface-mounted lighting, laminate flooring, a bathroom with a toilet, vanity, fiberglass shower and fan, painted drywall and trim, insulated exterior walls, five interior doors, and a partition wall around the mechanical area.

Notice what’s not in that model: a bedroom and an egress window. If your plan has bedrooms, add the cost of each egress opening and well.

The report also estimates that in Boise this basement project returns 100.7% of its cost at resale. By the same report, Boise bathroom remodels recoup well under half. Treat it as one data point, not a promise, but it lines up with the idea that turning existing space into usable living space is often money well spent.

What drives basement finishing costs?

  • Bedrooms and egress. Each new bedroom means an egress window and well.
  • A bathroom. Plumbing below the main drain line can be harder than upstairs. Ask early whether your basement plumbing drains by gravity.
  • Moisture. Damp or leaky walls need to be dealt with before anything gets framed in.
  • Ceiling height and obstructions. Ducts, beams and pipes running low can mean rerouting or soffits.
  • Finish level. Wet bars, built-ins, flooring and lighting are where the budget grows or shrinks.

A basement we finished

One of our clients, Diane, had us do a whole basement remodel, a bathroom remodel and a deck. She talks about it in her own words in a video on our Instagram. Jim posted demo day at another basement and bathroom remodel in May 2024. Whatever your basement looks like, it pays to settle permits, egress and moisture at the start of the bid, not the end.

How do I get started on my basement?

Tell us what you want the space to do: a bedroom, a family room, a bathroom, a rental, or all of it. Jim will walk the basement, look at the windows, ceiling height and plumbing, and send a free written bid with the permits included. Start your free consultation or call 208-780-9932.

Sources

Tell Jim about your project

A few quick questions, one per screen. Jim reads your answers, then calls or texts to set up a time to walk the project.